Publications

• Mordini A, Cerioni R, Iori I, "Three-dimensional numerical modeling of reinforced concrete mechanical behavior (3D-PARC)", submitted for publication to Enginnering Structures.

• Mordini A, Wenzel H, "Damage detection on beams structures by means of VCUPDATE, a numerical framework for Finite Element Model Updating", Electronic Journal of Structural Engineering, Volume 10: 2010.

download

• Mordini A, Strauss A, "An innovative earthquake isolation system using Fiber Reinforced Rubber Bearings", Engineering Structures, Volume 30, Issue 10, October 2008.

download

• Mordini A, Savov K, Wenzel H, "Damage detection on stay cables using an open source-based framework for Finite Element Model Updating", Structural Health Monitoring, Volume 7, Number 2, June 2008.

download

• Mordini A, Savov K, Wenzel H, "The Finite Element Model Updating: a powerful tool for Structural Health Monitoring", Structural Engineering International - IABSE, Volume 17, Number 4, 2007.

• Strauss A, Mordini A, Bergmeister K, "Nonlinear Finite Element Analysis of Reinforced Concrete Corbels at both Deterministic and Probabilistic Levels", Computers & Concrete, Volume 3, Number 2, April/June 2006.

• Mordini A, Veit-Egerer R, Wenzel H, "Damage identification on steel torsional bracings based on dynamic monitoring", Proceedings of the Seventh International Conference on Steel Bridges, Guimaraes, Portugal, 4-6 June 2008.

• Mordini A, Gutenbrunner G, Wenzel H, "Dynamic studies on an Austrian high-speed composite railway bridge", Proceedings of the Seventh International Conference on Steel Bridges, Guimaraes, Portugal, 4-6 June 2008.

• Mordini A, Wenzel H, "Bringing Experimental Tests and Numerical Modeling Together Bringing Experimental Tests and Numerical Modeling Together for a Reliable Investigation of Cables", Proceedings of the Seventh International Symposium on Cable Dynamics 2007, Vienna, Austria, 10-13 December 2007.

• Mordini A, Wenzel H, "VCUPDATE, a numerical tool for Finite Element Model Updating", Proceedings of the International Operational Modal Analysis Conference IOMAC 2007, Copenhagen, Denmark, 30 April-2 May 2007.

• Cerioni R, Iori I, Mordini A, "Modello costitutivo per l’analisi tridimensionale non lineare del conglomerato armato", 16° Congresso C.T.E., Parma, Italy, 9-11 November 2006.

• Wenzel H, Mordini A, "Automatic FE Update after Monitoring of Eigenmodes of Cables", Proceedings of the Symposium on Mechanics of Slender Structures MoSS, University of Northampton, 28-29 September 2006.

• Mordini A, "Three-Dimensional numerical modeling of reinforced concrete behavior", Dissertation for Doctorate in Civil Engineering at University of Parma, Italy, March 2006.

download

• Mordini A, "Un modello non lineare per l'analisi tridimensionale di elementi in calcestruzzo armato", Dissertation for Degree in Civil Engineering at University of Parma, Italy, July 2002.

• DETAILS Consortium (co-authors Mordini A, Wenzel H), "Six-monthly Report", Technical Report N. 1, 01/07/2006 – 30/12/2006.

• Mordini A, Savov K, Wenzel H, "SOFEC - Scilab-OpenSees Finite Element Model Updating Code", internal report for VCE - Vienna Consulting Engineers, Vienna, August 2005.

• Mordini A, Strauss A, "FE Analysis of P5151 with modification of MMI isolation configuration proposed by IKI", INDEPTH Project, European Community, March 2005.

• Mordini A, Strauss A, "Deterministic and Probabilistic Finite Element Analysis of Reinforced Concrete Corbels", Institute of Structural Engineering, BOKU University, Vienna, March 2005.

• Mordini A, Strauss A, "Finite Element Analysis of Fiber Reinforced Rubber Bearings (FRRB)", INDEPTH Project, European Community, December 2004.

• Mordini A, Savov K, Wenzel H, "Finite Element Model Updating Applied on Cables and Beams", SAMCO newsletter, Issue 20, november 2006, www.samco.org.

• Poster presentation for VCUPDATE.

• Poster presentation for numerical simulations.